14
USE AND CARE
USING THE OVEN FOR THE FIRST TIME
Operate as follows:
■
Assemble the wire racks on the oven
walls using the 2 screws (fig. 9a).
NOTE: they also provide support to the
grill heating element.
■
Slide in the grease filter on the back of
the oven as in fig. 10.
■
Slide into the guides, the shelf and the
tray (fig. 9b).
The rack must be fitted so that the safe
-
ty notch, which stops it sliding out, faces
the inside of the oven; the guard rail shall
be at the back.
The tray must be fitted so that the safe
-
ty notch, which stops it sliding out, faces
the inside of the oven.
■
To eliminate traces of grease in manu-
facture it is necessary to preheat the
oven at the maximum temperature:
•
For 60 minutes in the position and
for another 15 minutes in the po-
sition.
■
Unscrew the fixing screws and slide off
the wire racks to the oven wall as in fig.
9a.
The grill is secured to the rear wall of the
oven on a hinge system that allows it to
be lowered to allow proper access when
cleaning the oven ceiling (see next chap-
ter TILTING GRILL).
■
Let the oven cool down, switch off the
electrical supply, then clean the inside of
the oven with a cloth soaked in water and
neutral detergent and dry thoroughly.
CAUTION:
■
This appliance must be used only for the task it has explicitly been designed for, that
is for domestic cooking of foodstuffs. Any other form of usage is to be considered as
inappropriate and therefore dangerous.
■
Do NOT place combustible materials or products on this appliance at any time.
Figure 9a
Figure 9b
Stop notch
Stop notch
Guard rail
