17
installation
GB
You may use a Y-adaptor (not
included) for an additional water
feed for another appliance, for
example a washing machine. This
is only applicable for cold water
mains. A Y-adaptor is available
from most DIY stores.
water mains. Please ensure the black
rubber seal is in place.
• After connecting the hose, turn on your
water mains and check for leaks.
• Connect the dishwasher to the mains
socket.
• Do not bend your drain hose.
About the Safety Supply Hose
The safety supply hose consists
of the double walls. The hose’s
system guarantees its intervention
by blocking
the flow of water in case of
the supply hose breaking and
when the air space between the
supply hose itself and the outer
corrugated hose is full of water.
• Do not lift the drain hose higher than 10
cm from the table top, otherwise the unit
may not be able to expel the waste water
properly.
max.
10cm
• Secure the water drain hose to the waste
pipe to avoid it coming off during the
washing process.
• The waste pipe must only be
connected to the foul drains and
not the surface water drainage
system.
• The water drain hose should be
placed between 40 cm and 100
cm from the floor level and must
not be extended, otherwise the
unit may not be able to expel the
waste water properly.
• Please close the hydrant after
use.
• Before connecting to the waste
pipe, make sure to check the
waste pipe and remove any
stopper or blockage inside,
otherwise the unit may not be
able to expel the waste water
properly.
• Please close the hydrant after
use.
DDWTT17-TTS19_IB_2L_190619_grace.indb 17
19/6/2019 4:58 PM