16
installation
GB
water mains
Y-Adaptor
(not included)
safety water supply hose
Connect
to another
appliance
if required.
3. Do not connect the unit to the mains socket
before installation. Ensure you are not
installing the unit right in front of the mains
socket. This is to avoid potential damage
to the back of the unit. After installing the
appliance, ensure that the mains plug is
easily accessible.
4. Position the dishwasher next to a water tap
and a drain.
5. Ensure the water inlet and drain hoses are
not kinked or squashed. The unit must not
stand on the mains cable.
6. Make sure your plumbing is suitable for
use with the dishwasher. If in doubt contact
a qualified plumber. This unit MUST BE
connected to COLD WATER MAINS using
the new water inlet hose. OLD HOSE SETS
MUST NOT BE RE-USED. The water
pressure from the water mains needs to be at
a minimum of 0.04 MPa and a maximum of
1.00 MPa.
• Connect one end of the safety water
supply hose to your dishwasher, and then
connect the other end of the hose to your
The electrical connection
conditions must correspond with
the specifications on the rating
plate of the dishwasher. Do not use
extension cables.
DDWTT17-TTS19_IB_2L_190619_grace.indb 16
19/6/2019 4:58 PM