29
TELESCOPIC SLIDING SHELF
SUPPORTS
The telescopic sliding shelf supports make
it safer and easier to insert and remove the
oven shelf and tray . They stop when they
are pulled out to the maximum position .
Important!
When fitting the sliding shelf
supports, make sure that you fit:
•
The slides to the top wire of a rack .
They do not fit on the lower wire.
•
The slides so that they run out towards
the oven door .
•
Both sides of each pair of shelf slides .
•
Both sides on the same level .
To fix the sliding shelf support onto the side
racks:
•
Screw the side racks onto the oven
walls (figs. 8.6a, 8.6b).
•
Fit the sliding shelf support onto the
top wire of a rack and press (fig. 8.9).
You will hear a click as the safety locks
clip over the wire .
To remove the telescopic sliding shelf
supports:
•
Remove the side racks by unscrewing
the fixing screws (fig. 8.10).
•
Lay down the telescopic sliding
shelf support and side racks, with
the telescopic sliding shelf support
underneath .
•
Find the safety locks . These are the
tabs that clip over the wire of the side
rack (arrow 1 in fig. 8.11).
•
Pull the safety locks away from the wire
to release the wire (arrow 2 in fig. 8.11).
Cleaning the sliding shelf supports:
•
Wipe the supports with a damp cloth
and a mild detergent only .
•
Do not wash them in the dishwasher,
immerse in soapy water, or use oven
cleaner on them .
Left
Right
1
2
1
Fig . 8 .10
Fig . 8 .11
Fig . 8 .9
Summary of Contents for DDC 606-DF
Page 26: ...26 S F C T A B S T Fig 8 1 Fig 8 2 Fig 8 3 Fig 8 4 Fig 8 5...
Page 50: ...50...
Page 51: ...51...
