13
DESCRIPTION
(see fig. 1)
A
ON/OFF button
B
+/- adjustment buttons
C
MODE button (selects the operating mode)
D
“ECO plus” button
E
Timer button
F
Swivel button
G
Remote control receiver
H
Indicator light
I
Air intake grille
J
Filter
USE
Installation
The appliance can be used on any horizontal surface.
Do not overload the electrical circuit. Avoid using the same
outlet for other appliances.
Electrical connection
- Before plugging the appliance into the outlet, check
that the outlet power corresponds to the value indi-
cated on the rating plate and that the outlet power is
adequate for the load.
- THIS APPLIANCE COMPLIES WITH DIRECTIVE 2004/108/
EEC ON RADIO INTERFERENCE SUPPRESSION.
Operation and use
- Plug into the outlet.
- The appliance emits a beep. The indicator light (
H
)
comes on and remains lit while the appliance is pow-
ered.
- Press the ON/OFF button (
A
) to turn the appliance on.
The appliance comes on with the setting used during
the previous period of operation.
- Press the MODE button (
C
) to select one of the follow-
ing operating modes:
-
Fan
In this mode, only the fan operates and the appliance
does not heat the room.
-
Freeze prevention
In this mode, the appliance keeps the room at a tem-
perature of 7°C (45°F) to avoid freezing.
-
Heating 1, 2 and Heating 3
In this mode, the desired temperature can be selected
by pressing the adjustment b and – (
B
):
l
Heating 1 (low power)
The appliance operates at low power, reducing noise
levels and energy consumption to a minimum.
l
Heating 2 (medium power)
The appliance operates at medium power.
l
Heating 3 (high power)
The appliance operates at high power to heat the room
rapidly.
Please note:
Room temperature can be displayed in
either °F or °C.
To change the unit of measurement for the temperature,
press the + button for approx. 10 seconds, then release.
“
ECO plus” function
The “ECO plus” function is available in Heating 1, 2 and 3
modes only. To activate the function, press the “ECO plus”
button (D). When this function is active the appliance auto-
matically sets the most appropriate power level to guaran-
tee optimum comfort while reducing energy consumption.
While the “ECO plus” function is active, the appliance may
switch automatically to a lower heating power than the one
displayed. This may happen a number of times in an hour.
Swivel button
To distribute the air flow over a wider surface, press the
swivel button (
F
)
. The appliance swivels to the right
and left.
To stop the appliance in the desired position, simply press
the swivel button (
F
) again.
Turn the appliance off
To turn the appliance off, press the ON/OFF button (
A
).
The display may show a countdown for about 6 seconds.
Digital 24 h timer (selection from 0.5 hrs to 24 hrs)
This function can be activated from any operating mode.
Auto-start:
with the appliance in ON/OFF, press the timer
button (
E
) . The symbol is displayed together with
the time remaining before the appliance comes on. To ad-
just the timer, use the adjustment b and - (
B
), then
wait a few seconds for the setting to be stored. The stand-
by light (
H
) is displayed together with the symbol, indi-
cating that the timer has been set. When the programmed
time is reached, the appliance comes on with the settings
used during the previous period of operation.
Auto-off:
with the appliance on, press the timer button
(
E
). The symbol is displayed together with the time
remaining before the appliance goes off.
To set the timer, use the adjustment b and - (
B
),
