15
PROBLEM
CAUSE
SOLUTION
PF
display
Temperature sensor is not working
properly
The product needs to be serviced,
contact our toll free number for
assistance
Product doesn’t turn on
Check that the plug is connected to
the outlet
Auto-start is on
Room temperature reaches the set
temperature
Plug in
Wait till time elapsed or press the but-
ton (E) twice to cancel the auto-start
and push the button (A)
Use the “+” button to increase the set
temperature
A green dot is flashing and unit is off
The tip-over switch has been activated Make sure the appliance is standing
upright on a flat surface, if the problem
persists contact our toll free number to
assist you
The display shows "
H
t
" blinking
The internal temperature is too high.
The air intake or outlet grille is
obstructed
Check the appliance is correctly
positioned respecting the minum
distances from the wall, or objects, as
indicated on the instruction manual,
if not, position the appliance correctly
Remove the obstruction
Disconnect the plug from the outlet
and let the appliance cool down. After
few minutes plug the appliance again.
If the appliance doesn't work please
contact the De longhi toll free number
TROUBLESHOOTING
