GB
•
DO NOT
lay the unit flat as this may
damage the coolant system.
• During door reversal, when swapping
the position of the bottom hinge or
adjusting the levelling feet, tilt the
unit.
Do not
lay the unit flat.
4. Remove the stopper from the bottom of the
lower door and move it to the opposite side.
Screw tightly.
5. Remove both levelling feet and bottom
hinge. Swap their position.
6. Remove the middle hinge hole covers and
swap their position with the middle hinge.
Reverse the middle hinge.
Make sure that the two screw holes (the
stopper and the bottom of the lower door)
are aligned while driving the screw.
15
installation
D55TW19G_IB_2L_RC_191022_grace.indb 15
22/10/2019 5:04 PM
