GB
• Ensure the unit is unplugged and empty.
• To take the door off it is necessary to tilt the unit backwards. You should rest the unit on
something solid, e.g. a chair just below the top panel.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• We recommend that 2 people handle the unit during assembly.
• If you want to have the door swing reversed, we recommend that you contact a
qualified technician. You should only try to reverse the door yourself if you believe that
you are qualified to do so.
reversing the door swing
tools required:
Philips style screwdriver / Flat bladed screwdriver / Hexagonal spanner
1. Remove the upper hinge cover, screws and upper
hinge. Lift the upper door and place it on a padded
surface to prevent from being scratched.
2. Remove the stopper from the bottom of the
upper door and move it to the opposite side.
Screw tightly.
3. Remove the middle hinge. Lift the lower door
and place it on a padded surface to prevent
from being scratched.
Upper hinge cover has left and right side. The
upper hinge cover packed as an accessory is
for the left side.
Make sure that the two screw holes (stopper
and the bottom of the higher door) are
aligned while driving the screw.
14
installation
D55TW19G_IB_2L_RC_191022_grace.indb 14
22/10/2019 5:04 PM
