12
CLEANING THE CAPPUCCINO NOZZLE
1.
Unscrew the cappuccino nozzle by turning gently (fig. 17).
2.
Clean the cappuccino nozzle carefully in hot water.
3.
From time to time, use a pin to clean the holes in the cappuccino nozzle
(fig. 18).
IMPORTANT:
NEVER unscrew the water tank cap or remove the filter-holder when the
machine is switched on, as the boiler is under pressure.
In order to check whether there is pressure in the water tank:
• Switch the machine off.
• Remove the plug from the wall socket.
• Turn the steam knob slowly counter-clockwise.
• If steam escapes from the tube, then the water tank is still under
pressure.
• Place a receptacle under the steam tube.
• Open the steam knob so that the residual steam can escape.
• When all the steam has escaped from the tube, close the steam knob by
turning it clockwise.
At this point, the water tank cap and the filter-holder can be removed.
PERIODIC CLEANING AND MAINTENANCE
•
Before carrying out any cleaning or maintenance operations, switch the
machine off, remove the plug from the socket and leave the machine to
cool.
•
Do not use solvents, detergents or abrasive products to clean the
machine. A soft damp cloth is sufficient.
•
Clean the filter-holder, filter and drip tray regularly.
•
Do not wash the machine - remember that it is an electrical appliance.
•
Never wash components or accessories in a dishwasher.
Summary of Contents for BAR6
Page 2: ...2...
