18
PROBLEM
CAUSE
SOLUTION
At the end of descaling, the appliance
requests a further rinse
During the rinse cycle, the water tank
has not been filled to the MAX level
Complete the rinse cycle from point (8) of sec-
tion “8. Descaling”
The appliance does not grind the coffee There is foreign matter that cannot be
ground in the coffee grinder
Clean the burrs as described in section “5.8
Cleaning the burrs”, making sure you remove
all the beans from the beans container (A1)
before extracting it.
Before putting the burr back, vacuum all resi-
dues from the housing (fig.14)
The coffee beans container is not in the
right position
The container is correctly inserted when the
arrow
▲
is lined up with the symbol and
you hear a “click”.
If you want to change the type of coffee You must remove all the beans present
in the machine
• Empty the beans container (if neces-
sary, operate the coffee grinder with-
out beans or use a vacuum cleaner to
remove any remaining beans)
• Attach the filter holder and operate the
coffee grinder a number of times with-
out beans to free the grinder. Attach the
filter holder to the outlet of the grinder
(A18), lining it up with "INSERT", then
turning it to the right. Grinding begins
when the filter holder reaches the CLOSE
position and stops automatically. Re-
peat until the filter is empty
• Place the new coffee in the beans
container
• If the amount of coffee ground is not
enough to reach the perfect dose, pro-
ceed setting the appliance as for the
first use
…
→
