-2-
English
Description
This thermostat by Delock can be used to control heating equipment or to switch signal devices when the temperature is exceeded. The
contact opens when the temperature rises. Due to the integrated clips on the back, it can be mounted on a 35 mm DIN rail in a control
cabinet.
Specification
• Connector:2 pin terminal for 2.5 mm²
• Switching function: normally closed contact
• Switching capacity: max. AC 250 V, 10 (2) A / 120 VAC, 15 (2) A DC 30 W
• Switching temperature difference: 7 K (±4 K tolerance)
• Temperature setting range: 0 °C ~ 60 °C
• Sensor: thermobimetal
• DIN rail mounting: 35 mm
• Protection class: IP20
• Lifetime: > 100.000 cycles
• Fire-resistance rating: 94V-0
• Operating temperature: -45 °C ~ 80 °C
• Colour:
housing: grey
temperature regulator: red
• Housing material: plastic
• Dimensions (LxWxH): ca. 60 x 43 x 33 mm
Package content
• Thermostat
• User manual
Safety instructions
• The installation should only be carried out by qualified electricians in compliance with the usual national power supply guidelines.
• Protective measures must be ensured.
• The contact system of the controller is exposed to the influences of the environment. As a result, the contact resistance can change, this
can lead to a voltage drop and/or self-heating of the contacts.
• The device should be installed in the upper area of the control cabinet at the largest possible distance from heaters or other heat-
generating components.
• The technical specifications must be adhered and should not be exceeded.
• The ventilation slots on the thermostat should not be covered.
Application
The thermostats are used to control heating equipment or to switch signal devices when the temperature is exceeded.
Normally closed contact (switching contact opens when temperature rises)
Installation and Operation
1.
Attach the device to a 35 mm DIN rail.
2.
Connect the device to a filter fan or a signalling device.
3.
Use the blue rotary button to adjust the temperature as required.
