17
o
VIEW SET:
This option allows the user to view a specific range of readings in a particular job,
as opposed to the entire set, by providing a configurable start point. It becomes useful when
large numbers of readings are present in the meter. View Set always begins by displaying “1 TO
XXX”, where XXX is the maximum number of readings in the selected job. If left unchanged, the
first reading to be reviewed will be number 1. Readings may only be reviewed in ascending
sequential order.
Using the Left or Right buttons, the left-side value can be changed in increments of 10. For
example, assume the selected job contains 23 readings. The View Set entry will begin by
displaying “1 TO 23”. Successive Right button presses will yield the following: “11 TO 23” and
“21 TO 23”. At this point, the value on the left side is within 10 readings of the value on the
right side. Alternately, pressing the Left button causes the meter to subtract 10 from the
current left-side value.
o
DONE:
Selecting this option signals to the meter that the user has completed the reading recall
setup process and is ready to begin reviewing readings.
NOTE:
There may be a significant delay while the meter processes the required set of readings for
review, depending on the number of jobs present in the meter, percentage of memory space occupied
by readings, current job size and fragmentation. The meter will display a screen with the word
“PROCESSING…”. User input is ignored during this time. Control is returned to the user once the
algorithm is complete and the Retrieved Readings screen is displayed, as shown in the example below:
o
Cancel
: This feature returns the meter to the Storage Menu
o
Clear Memory
: This menu option will erase the storage memory while keeping the default
meter settings intact. This feature offers accidental feature access protection through the use of
a subsequent memory deletion confirmation screen:
NOTE:
Memory deletion is irreversible
.
