www.dellonda.co.uk 9
Assembly
• The number of persons required for
installation: 1 adult at least. Allow a minimum
of 15 minutes for site preparation and water
filling.
1) Unfold the inflatable spa over the
groundsheet.
2) Bring the pump unit to the inflatable spa.
3) Connect the inflation hose to the pump outlet.
4) Insert the inflation hose into the inflatable
spa.
5) Connect the pump unit then press the
massage button to inflate the spa. The air flow
valve prevents your spa from over-inflating.
6) Inflate the inflatable spa for about 10
minutes. Ensure that the spa is firmly inflated.
7) Remove the inflation hose and screw the cap
firmly in place.
8) Connect the unit pump to the spa using the 3
connectors. Ensure the icons on the pump and
the spa match up, and the connections are
secure.
9) Cartridge location as shown.
10) Put the filter cartridge in the housing then
screw it onto the lower section port inside the
spa.
