background image

Important Information

Please read these instructions carefully. Note the safe operational requirements, warnings & cautions. Use the product correctly and with care 

for the purpose for which it is intended. Failure to do so may cause damage and/or personal injury and will invalidate the warranty. Keep these 

instructions safe for future use.

Refer to 

instruction 

manual

Wear

Gloves

Specification label

About the Product

Innovative design of Gas Flame Pyramid Patio Heaters. These contemporary freestanding patio heaters produce a pleasant, heated working/

relaxing environment and are ideal for both commercial and domestic settings including open workshops, boat yards, patios, forecourts, gardens 

and terraces. Standing at 2.27m tall, when lit the heaters produce a real flame encompassed by a glass tube which heats the surrounding area, 

a metal reflector makes sure heat is directed downwards and outwards. The units feature variable heat output controls and a fully enclosed gas 

cylinder chamber with safety tip-over switch. Available in black or stainless steel and supplied with regulator and hose assembly for use with 

propane patio gas bottles. These products should only be used in a well ventilated area.

Specification

Model ............................................................................DG98 ..............................................................................................DG99

Fuel Consumption: .....................................................945g/hr ........................................................................................... 945g/hr

Fuel: ......................................................................... Propane ......................................................................................... Propane

Heated Area: ....................................................................8m² ................................................................................................. 8m²

Output: ..........................................................................13kW .............................................................................................. 13kW

Product Dimensions (W x H): ..........................520 x 2270mm ................................................................................520 x 2270mm

Maximum Gas Bottle Size (W x H): ................Ø320 x 700mm ...............................................................................Ø320 x 700mm

Safety Instructions

•  Read the installation, operating and maintenance instructions thoroughly before installing or using this equipment.

• 

If there is a smell of gas: shut off the gas to the appliance, extinguish any open flames. If odour continues contact gas supplier.

• 

DO

 

NOT

 store or use petrol or other flammable substances inside the housing of the heater.

• 

DO

 

NOT

 store or use petrol or other flammable liquids or gases in the vicinity of the heater.

• 

DO

 

NOT

 store a gas cylinder that is not connected for use in the vicinity of this or any other appliance.

• 

WARNING

DO

 

NOT

 use indoors. For use outdoors or in amply ventilated areas.

• 

An amply ventilated area is one that has a minimum of 25% of the surface area open, see fig.1. (The surface area is the sum of the wall surface.)

• 

WARNING

! Not intended to be installed in recreational vehicles and/or boats.

• 

WARNING

! Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage.

• 

Installation and repair must be carried out by a qualified person.

• 

DO

 

NOT

 attempt to alter in any way.

•  This product must be installed and the gas cylinder stored in accordance with the local regulations in force.

• 

DO

 

NOT

 obstruct the ventilation holes of the cylinder housing.

• 

DO

 

NOT

 move/transport the appliance when in operation. Shut off the gas cylinder at the regulator before moving.

• 

DO

 

NOT

 move/transport the heater until it has cooled down.

• 

Use only the type of gas and the type of cylinder specified by the manufacturer.

•  The 

LP

 cylinder used with the patio heater must meet the following size requirements: Diameter 31.8cm x height 58cm, 15kg maximum capacity.

•  In case of violent wind precautions must be taken against tilting of the appliance.

•  Only use on level ground, capable of supporting the weight of the heater and the gas cylinder.

• 

DO

 

NOT

 connect the gas cylinder directly to the appliance without a regulator. Use only the type of gas specified in the instructions.

• 

The whole gas system (hose, regulator, pilot or burner) should be inspected for leaks or damage before use and at least annually, by a suitably 

qualified person.

• 

All leak testing should be done with an appropriate gas leak detection/soap solution. Never use an open flame to check for leaks.

• 

DO

 

NOT

 use the heater until all connections have been leak tested.

fig.1

Summary of Contents for DG98









Reviews: