DELLA 048-GM-48200 User Manual Download Page 13

 

 

13

Cold Water using 

The preceding mount of cold 

water is too much. 

Wait for a moment until cold 

water comes out.

 

Air clearance 

between the unit 

and the wall 

The ventilation around the 

apparatus is insufficient. 

Space the unit from the wall 

by more than 15 centimeters 

at each side of the unit.

 

Water separator in 

the cold tank 

The cold water separator has 

moved in the cold water tank 

Replace the water isolator at 

the correct position.

 

Water 

bottle 

The temperature of water 

supplied (in the bottle) is too 

high.(when the bottle is 

exposed to direct sunlight for 

a long time) 

Put the water at a   

shady, cool place

 

Ice-making 

Both Ice-making and cold water 

function are running at same time. 

Wait some more moment or stop 

ice-making function first. 

Ice Button and Ice 

indicator on the 

control panel 

Ice-making function is not 

turned on by the button. 

Press the Ice-making button.

Ice making only not available 

Cold water function 

Both Ice-making and cold water 

function are running at same time. 

Wait some more moment or stop 

Cold Water function first. 

Main power supply 

Voltage too low 

Contact electrician and electricity 

department 

Ventilation opening 

blocked 

Blocked 

Remove the block substance 

Clearance around the 

unit 

Too small clearance, bad air 

circulation 

Leave enough (Min. 15cm) space 

around the unit 

Condenser 

Too dirty, produce overheated 

Clean 

Cooling 

system 

Refrigerant over charged or 

leaked 

Contact with qualified serviceman 

to repair it. 

Compressor not run or 

suddenly stops 

Compressor and its 

accessory 

Breakdown 

Call serviceman to check and 

repair it. 

Warn indicator illuminate and 

buzz sounds 

Water bottle 

There is no water. 

Replace  with  a  new  bottle  full 

with drinkable water. 

Warn indicator flash on the 

control panel 

Ice-making box in the 

ice making chamber 

The ice making box is clogged by 

the ice or mechanism 

Stop the unit and wait for more 

time to let the clogged ice melt. 

Water faucet 

button 

Water faucet button maybe 

has been clogged, can not act 

smoothly. 

Check it, let the button go 

out.

 

Water leaks from the taps 

or the faucet 

Water faucet 

The water faucet has been 

damaged. 

Call the service or the sale 

agent telephone number to 

let them change a new one.

 

Water bottle 

The bottle may has small pin 

holes. 

Change to a new bottle.

 

Water is dripping out of 

the water dispenser and 

onto the floor. 

Both of water 

drain cap on the 

Loose 

Tighten it completely

 check and 

check the sealing silicon 

Summary of Contents for 048-GM-48200
















Reviews: