DELLA 048-GM-48200, User Manual

Page: 12 / 15

12
them back to original position with screw by screwdriver.
PRECAUTION
z
When cleaning, the outside of the machine can be washed with the wet soft clothe. Don’t use
erosive chemical solvent such as rubber water to wash, this maybe hurt the machine and
make it change color. Be careful that don’t pour water on the whole enclosure when washing,
avoiding making its internal electrical parts wet.
z
Keep the unit away from the wall with proper distance, keep it far away from high
temperature surrounding and prevent it from being exposed in the sunlight or other heating
resource. Keep ventilation opening in the appliance enclosure or in the built-in structure,
clear of obstruction.
z
If you will not use the unit for a long time, please disconnect the power cord, and drain out
the water from both of the drain cap. And fasten the drain cap tightly. On other condition
don’t touch it because it will cause the water leakage.
z
Children are forbid to touch the hot tap. It is dangerous and will burn your skin.
If the unit works improperly, please check reference to the following table:
PROBLEM CHECK PROBABLE CAUSE REMEDY
Main Power Supply
switch in your home
At “OFF” position Move to “ON” position
Power plug Not on the power outlet Plug it.
Circuit breaker Tripped Check and reclose
Main Fuse Blown out Replace
Power breakdown Main power supply Wait till the main power supply
resume
Transformer Unplug on the PCB Controller or
breakdown
Call the electrician or serviceman
to maintenance
Hot and cold water,
ice-maker are all not
available, and the POWER
indicator isn’t illuminate
on the control panel
Fuse on the PCB
board
Blown out Call the electrician or serviceman
to replace it with same rating.
Hot Water Button
and Hot Water
indicator
Hot water function is not
turned on by the button on
the control panel
Press the Hot Water button.
Hot water using The preceding amount of hot
water is too much.
Wait for a moment until the
hot water occurs out.
Only hot water not
available
Hot water sensor Breakdown Call the serviceman to replace
with a new one.
Only cold water not
available
Cold Water Button
and Cold Water
indicator on the
control panel
Cold water function is not
turned on by the button
Press the Cold Water button.
TROUBLE SHOOTING GUIDE