Dell XPS 8500 Owner'S Manual Download Page 35

Page: 35 / 136

Graphics-Card Bracket (optional)

Graphics-Card Bracket (optional)

WARNING:

Before working inside your computer, read the safety information

that shipped with your computer and follow the steps in "Before You Begin" on
page 13. For additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.

Prerequisites

Remove the computer cover. See "Removing the Computer Cover" on

page 23.

Removing the Graphics-Card Bracket

Remove the screws that secure the graphics-card bracket to the chassis.

Lift the graphics-card bracket off the chassis.

Set the graphics-card bracket aside in a secure location.

book.book Page 35 Wednesday, April 4, 2012 2:00 PM

Summary of Contents for XPS 8500









































































































































Search results

Summary of Contents for XPS 8500

Reviews:

Related manuals for XPS 8500

Brands by name

Popular brands

Dell XPS 8500, Owner'S Manual

Search results

Summary of Contents for XPS 8500

Reviews:

Related manuals for XPS 8500

Brands by name

Popular brands