manualshive.com logo in svg

Dell XPS 15, Service Manual, Page: 25 / 117

Share
Download
Dell XPS 15 Service Manual Download Page 25

Identifier

GUID-5DE1E07B-4633-4536-ACBF-4A3067007FE0

Status

Released

Removing the hard drive

WARNING: Before working inside your computer, read the safety 
information that shipped with your computer and follow the steps in 

Before 

working inside your computer

. After working inside your computer, follow 

the instructions in 

After working inside your computer

. For more safety best 

practices, see the Regulatory Compliance home page at 

www.dell.com/

regulatory_compliance

.

CAUTION: Hard drives are fragile. Exercise care when handling the hard 
drive.

CAUTION: To avoid data loss, do not remove the hard drive while the 
computer is in sleep or on state.

 

Identifier

GUID-C7C10D90-ADC9-4C77-887A-AF3EE25E9BDA

Status

Released

Prerequisites

1 

Remove the 

base cover

.

2 

Remove the 

battery (half-length)

.

Identifier

GUID-D6DE55CD-9F65-40DC-8643-7C6D95509DA6

Status

Released

Procedure

1 

Remove the four screws (M2x4) that secure the hard-drive cage to the palm-
rest assembly.

25

Summary of Contents for XPS 15






















































































































Reviews:

No comments