Replacing the wireless card
WARNING: Before working inside your tablet, read the safety
information that shipped with your tablet and follow the steps in
Before working inside your tablet
. After working inside your tablet,
follow the instructions in
After working inside your tablet
. For more
safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
CAUTION: To avoid damage to the wireless mini-card, do not place
any cables under it.
1
Align the notch on the wireless card with the tab on the wireless-card
slot and slide the card into the wireless-card slot.
2
Align the screw hole on the wireless card with the screw hole on the
system board.
3
Connect the antenna cables to the wireless card. The following table
provides the antenna-cable color scheme for the wireless card supported
by your tablet:
Connectors on the wireless card
Antenna-cable color
Main (white triangle)
White
Auxiliary (black triangle)
Black
4
Align the screw hole on the wireless-card bracket with the screw hole on
the system board.
5
Replace the screw that secures wireless-card bracket and the wireless
card to the system board.
Post-requisites
Replace the
battery
.
20
Summary of Contents for XPS 12
Page 48: ...1 back cover 48 ...
