Figure 8. Wyse Device Agent (CCM)
If the device is not registered to a CCM server, the
Wyse Device Agent
screen shows the registration status as
Not Registered
.
1
In the
CCM Server
input box, enter the URL of CCM server you want to connect to.
2
In the
MQTT Server
input box, enter the IP address or hostname of Message Queue Telemetry Transport (MQTT) server.
3
In the Group Token input boxes, enter your group registration key to manage your ThinLinux device. This is a unique key for registering
your thin client device. Thin clients can be directly registered to Groups directly and must have a Group Registration Key enabled to
perform this action.
4
Do one of the following options:
•
Click
Register
to register your thin client on CCM server. When your thin client is successfully registered, the status is shown as
Registered with green color icon next to the Registration Status label, and caption of Register button changes to Unregister.
•
Click
Unregister
, if you want to remove your thin client from the CCM management system. If Unregister fails, a dialog box for
Force Unregister confirmation is displayed. Click
Yes
to forcefully unregister your device which is managed by CCM. When you
perform Register or Unregister or Force Unregister from Agent screen, the applet should not be closed until Registration Status.
After successful registration, you can access the CCM management server screen where you can view and manage Device Asset
Details, Real-Time commands, and Troubleshooting information of your registered thin client.
Directing the Thin Client to CCM Server
:
•
To direct your thin client to CCM server, you must provide CCM/MQTT server details and Group registration Key. These details is
discovered by Wyse Device Agent using any of the following ways:
•
DHCP Scope options
•
Using INI parameter
•
Using the Wyse Device Agent screen
•
Directing the thin client to CCM Server using DHCP Scope options. The CCM/MQTT server details and Group Registration Key
that are required for CCM registration can be obtained by querying the DHCP server with following option tags:
•
199 – Scope option for Group Token (type = String, value = CCM-group-key).
•
165 – Scope option for CCM server.
•
166 – Scope option for MQTT server.
•
Directing the thin client to CCM Server using INI parameters, INI syntax for CCM configuration:
•
CCMEnable={yes,no} CCMServer=<CCM Server URL> GroupRegistrationKey=<tenant code-group code>
MQTTServer=<MQTT server>[:<MQTT port>]
Wyse Management Interface
39
