Dell Vostro 3750 Owner'S Manual Download Page 132

Page: 132 / 147

System Memory

Displays the memory in-built on the

computer.

Memory Speed

Displays the memory speed.

Device Information

Fixed HDD

Displays the model number and capacity

of the hard drive.

SATA ODD

Displays the model number and capacity

of the optical drive.

eSATA Device

Displays information about the installed

eSATA device.

AC Adapter Type

Displays the type of the AC adapter.

Advanced

Intel SpeedStep

Enable or disable the Intel

SpeedStep feature.

Default: Enabled

Virtualization

Enable or disable the Intel

Virtualization feature.

Default: Enabled

Integrated NIC

Enable or disable the power

supply to the on–board

network card.

Default: Enabled

USB Emulation

Enable or disable the USB

emulation feature

Default: Enabled

USB Powershare

Allows the computer to

charge external devices

using the stored system

battery power through the

USB PowerShare port,

even while the computer is

turned off.

Default: Enabled

USB Wake Support

Allows USB devices to

wake-up the computer from

standby. This feature is

enabled only when the AC

adapter is connected.

Default: Disabled

132

Summary of Contents for Vostro 3750




















































































































































Search results

Summary of Contents for Vostro 3750

Reviews:

Related manuals for Vostro 3750

Brands by name

Popular brands

Dell Vostro 3750, Owner'S Manual

Search results

Summary of Contents for Vostro 3750

Reviews:

Related manuals for Vostro 3750

Brands by name

Popular brands