Next steps
1. Connect the battery cable to the connector on the system board.
2. Replace the
3. Replace the
4. Follow the procedure in
after working inside your computer
Hard drive
Removing the hard drive assembly
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
3. Remove the
4. Remove the
Steps
1. Lift the latch and disconnect the hard drive cable from the system board [1].
2. Remove the four (M2x3) screws that secure the hard drive assembly to the palm rest and keyboard assembly [2].
3. Lift the hard drive assembly along with its cable off the palm rest and keyboard assembly [3].
26
Removing and installing components
