3. Align the notch on the solid-state drive with the tab on the solid-state drive slot.
4. Slide and insert the tab of the solid-state drive into the solid-state drive slot [1, 2].
5. Tighten the captive screw that secures the thermal plate to the palmrest and keyboard assembly [3].
6. Replace the single (M2x3) screw that secures the thermal plate to the palmrest and keyboard assembly [4].
Next steps
1. Connect the battery cable to the connector on the system board.
2. Replace the
3. Replace the
4. Follow the procedure in
after working inside your computer
Removing and installing components
23