Installing the heatsink—UMA
Steps
1
Place the heatsink on the system board and align the screw holes on the heatsink with the screw holes on the system board [1].
2
In sequential order (as indicated on the heatsink), tighten the four captive screws that secure the heatsink to the system board [2].
Next steps
1
2
3
4
Follow the procedure in
after working inside your computer
Removing the heatsink—discrete
Prerequisites
1
Follow the procedure in
before working inside your computer
2
Remove the
3
Remove the
4
Remove the
Removing and installing components
61
Summary of Contents for Vostro 3400
