Installing the Access Panel
1.
Place the access panel to its original position on the computer.
2.
Tighten the screw to secure the access panel to the computer.
3.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Wireless Local Area Network (WLAN) Card
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the access panel.
3.
Disconnect the antenna cables from the WLAN card and remove the screw that secures the WLAN card to the
computer. Remove the WLAN card from the computer.
Installing the WLAN Card
1.
Slide the WLAN card into its slot.
2.
Connect the antenna cables according to the color code on the WLAN card.
3.
Install the access panel.
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Coin-Cell Battery
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the access panel.
3.
Use a plastic scribe to pry the battery from the socket and lift the coin-cell battery out of the computer.
11
Summary of Contents for Vostro 3360
