Installing the I/O Panel
1.
Place the I/O panel at it's location on the computer.
2.
Replace the screw to secure the I/O panel to the computer.
3.
Route the cables through the metal clips.
4.
Replace the cover.
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Processor
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the cover.
3.
Disconnect the heat sink and fan-assembly cable from the system board.
4.
Loosen the captive screws that secures the heat sink and fan assembly to the system board.
21
Summary of Contents for Vostro 270
Page 1: ...Dell Vostro 270 Owner s Manual Regulatory Model D11M Regulatory Type D11M002 ...
Page 28: ...28 ...
Page 40: ...40 ...
