Dell Vostro 15-7580, Owner'S Manual, Page: 39 / 105

Installing the touchpad
1 Place the touchpad assembly into the slot on the system.
2 Replace the four (M2x2) screws that secure the touchpad assembly to the system.
3 Install the:
a back cover
b rear cover
c memory module
d WLAN card
e HDD
f SSD card
g battery
h base cover
4 Follow the procedure in After working inside your computer .
LED-kort
Removing the LED board
1 Follow the procedure in Before working inside your computer .
2 Remove the:
a base cover
b battery
c SSD card
d WLAN card
e HDD
f memory module
g rear cover
h back cover
3 To remove LED board:
a Lift the latch and disconnect the LED board cable [1].
b Remove the single (M2x3) screw that secures the LED board cable to the display assembly [2].
c Slide and lift the LED board from the display assembly [3].
Sådan fjernes og installeres komponenter 39