6.
Repeat steps 4 and 5 to remove the second memory module.
Replacing a Memory Module
Ground yourself and install the memory module:
1.
Align the notch in the module edge connector with the tab in the connector slot.
2.
Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place. If you do not feel the click, remove the
module and reinstall it.
3.
Replace the
access panel
.
4.
Replace the
battery
.
Back to Contents Page
CAUTION:
Insert memory modules at a 45-degree angle to avoid damaging the connector.
