Dell UltraSharp 2208WFP, Service Manual

Page: 32 / 63

Service Manual
31
Fig10
Exit: Exit from Factory mode and back to NO OSD Status.
Auto Color: Automatically calibrate chip ADC parameters by using internal DAC.
Burn In: Enable or disable the Burn-in mode by choosing ON or OFF.
Reset Timer: Reset the “Turn-on time” of the panel to 0H0M.
Color Temp: The R, G, B of Cool (9300K), Warm (5700K) and Desktop (6500K) are generated
from scaling chip’s back-end white-balance program.
Time: Turn-on time of the panel.
DEBUG: Debug tool of scale IC.
Dell panel P/N
LCD supplier Panel Supplier P/N Dell P/N
CMO 22”W
M220Z1-L05
D966D
Burn-in pattern
Burn-in pattern will self-generate automatically without VGA and DVI cable plugged in when the monitor set at
Burn-in on mode and burn-in pattern will not be stopped until plugging in the VGA cable. Exit Burn-in mode
method as followe: plugging in the VGA/DVI cable, press “Menu” button to call out OSD Main Menu, Press “Plus
Key”to select“Other Settings Menu”then pop submenu and choose Factory reset.