Dell UltraSharp 2208WFP, Service Manual

Page: 33 / 63

Service Manual
32
Auto Color Balance (Automatically calibrate chip ADC parameter by using chip internal
DAC.)
5.1 If it is a new-built set, press “ Auto/Plus ” button to execute “Auto Color” at standard video pattern
5-MOSAIC
pattern
5.2 Please confirm the following steps to perform “Auto Color Balance”:
- Connect the VGA cable with the standard video pattern generator and display
5-MOSAIC
pattern on the
monitor.
- Press “ Power ” button to power off the monitor.
- Press “ Menu ” and “ Auto/Plus ” buttons simultaneously; then press “ Power ” button to power on the
monitor.
-
Press “Plus Key”, select“Other Settings Menu” ,then Press “Plus Key”and choose factory at bottom
- Set BurnIn Mode item to ON, then execute Auto Color item.
- After the “ Auto Color Balance ” process finished, go back to “Other Settings Menu”, and press “Factory Reset” to exit Factory
mode
Upgrade Firmware to Serial via Flash Cable by ISP_Tool V4.100.exe
7.1 Connect the monitor and PC follow Fig 11