Automatic Save
With the OSD open, if you make an adjustment and then either proceed to another menu or exit the OSD, the display
automatically saves any adjustments you have made. If you have made
no
adjustments, the on-screen menu disappears and
the display does not save any new settings.
OSD Warning Messages
Self-Test Feature Check (STFC)
The floating 'Dell - Self Test Feature Check' dialog will appear on-screen (against a black background) under the following
conditions: First, if the display is powered on with no signal input attached, with any of the inputs selected. Second, if the
signal cable is already attached, display is powered on, display is working properly, then the video cable is detached. This is
true for any inputs selected. The display should stay in STFC mode until the input selection button is pressed to select an
image source which is active, or the cable is re-attached. For the DB15 analog or DVI-D digital inputs, this case will put the
display in power save or DPMS (see next section).
In Power Save Mode
When the computer system send DPMS signals for display power management, the display will show the message of “Power
Saving Mode” for 10 seconds then enter power saving mode. This occurs when the DB15 analog or DVI-D digital input is
connected and selected, but the computer source has gone inactive. While the display is in power saving mode, the screen
will remain black. You can press any key or move mouse to reactivate the display.
Input Signal Out of Range
Factory Reset:
Return you display settings to those set a
manufacturing. Press button to activate
