Dell U4021QW User Manual Download Page 47

Page: 47 / 80

Operating the monitor |

Using the On-Screen Display (OSD) Menu

Accessing the menu system

Icon Menu and

Submenus

Description

Brightness/
Contrast

Use this menu to activate

Brightness/Contrast

adjustment.

Display

PIP/PBP

Input Source

Color

USB

Brightness/Contrast

Exit

UltraSharp 40 Monitor

Audio

Personalize

Others

75%

Brightness

adjusts the luminance of the backlight

(minimum 0; maximum 100).
Move the joystick up to increase brightness.
Move the joystick down to decrease brightness.

Contrast

Adjust the

Brightness

first, and then adjust

Contrast

only if further adjustment is necessary.
Move the joystick up to increase contrast and Move the
joystick down to decrease contrast (between 0 and 100).
The

Contrast

function adjusts the degree of difference

between darkness and lightness on the monitor screen.

Summary of Contents for U4021QW

















































































Search results

Summary of Contents for U4021QW

Reviews:

Related manuals for U4021QW

Brands by name

Popular brands

Dell U4021QW, User Manual

Search results

Summary of Contents for U4021QW

Reviews:

Related manuals for U4021QW

Brands by name

Popular brands