3.
Connect the Thunderbolt 3 (Type-C) connector to the computer.
Figure 4. Connecting the Thunderbolt 3 (Type-C) connector
NOTE: Connecting the Thunderbolt 3 (Type-C) cable will auto wake-up the laptop and connect
any peripherals already attached. This behavior can be disabled in your BIOS Setup option
“Wake on Trinity Dock”.
4.
Connect multiple displays to the docking station, as needed.
NOTE: Computers requiring more than 130 W power input must also be connected to their
own power adapter for charging and operating at full performance.
15
Summary of Contents for Thunderbolt Dock TB15
