b.
While supporting the battery connector, press the battery toward the positive side of the connector and pry it up out of the securing tabs at the
negative side of the connector.
5.
Install the new system battery.
a.
Support the battery connector by pressing down firmly on the positive side of the connector.
b.
Hold the battery with the "+" facing up, and slide it under the securing tabs at the positive side of the connector.
6.
Press the battery straight down into the connector until it snaps into place.
7.
Close the computer cover.
8.
Connect your computer and devices to electrical outlets, and turn them on.
9.
Enter the system setup program
and restore the settings you recorded in step 1.
10.
Properly dispose of the old battery. See the
Product Information Guide
for battery disposal information.
Back to Contents Page
NOTICE:
To connect a network cable, first plug the cable into the network port or device and then plug it into your computer.
