Dell Studio XPS 13 - Laptop - Obsidian Service Manual Download Page 38

Page: 38 / 41

Flashing the BIOS

You may need to flash (update) the BIOS when an update is available or when you replace the system board.
Follow these steps to flash the BIOS:

Turn on your computer.

Go to

www.dell.com/support

Click

Product support

, enter the Service Tag of your computer, and then click

Submit

NOTE:

If you do not have the Service Tag, use the auto-detect feature or manually browse for your computer model.

Click

Drivers & downloads

Find it myself

Select the operating system installed on your computer.

Scroll down the page and expand

BIOS

Click

Download

to download the latest version of the BIOS for your computer.

After the download is complete, navigate to the folder where you saved the BIOS update file.

Double-click the BIOS update file icon and follow the instructions on the screen.

Flashing the BIOS

Summary of Contents for Studio XPS 13 - Laptop - Obsidian










































Search results

Summary of Contents for Studio XPS 13 - Laptop - Obsidian

Reviews:

Related manuals for Studio XPS 13 - Laptop - Obsidian

Brands by name

Popular brands

Dell Studio XPS 13 - Laptop - Obsidian, Service Manual

Search results

Summary of Contents for Studio XPS 13 - Laptop - Obsidian

Reviews:

Related manuals for Studio XPS 13 - Laptop - Obsidian

Brands by name

Popular brands