Replacing the base cover
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
Procedure
1
Align the screw holes on the base cover with the screw holes on the palm-rest assembly and snap the base cover into place.
2
Using your fingertips, open the system badge.
3
Replace the screw (M1.6x4) under the system badge that secures the base cover to the palm-rest assembly.
4
Replace the eight screws (M2x3, Torx) that secure the base cover to the palm-rest assembly.
4
Replacing the base cover
11
Summary of Contents for Studio XPS 13 - Laptop - Obsidian
Page 10: ...10 Removing the base cover ...
Page 13: ...Removing the battery 13 ...
Page 18: ...18 Disconnecting the wireless antenna cables ...
