Dell Studio 540 Service Manual Download Page 5

Page: 5 / 36

Great user manuals database on

Remove the screw holding the card retention bracket.

Lift the card retention bracket and set it aside in a secure place.

Remove the filler bracket to create a card-slot opening.

Prepare the card for installation.

See the documentation that came with the card for information on configuring, customizing and making internal connections on the card.

Align the card with the connector.

Place the card in the connector and press down firmly. Ensure that the card is fully seated in the slot.

Replace the card retention bracket. See

Replacing the Card Retention Bracket

10.

Connect any cables that should be attached to the card.

See the documentation for the card for information about the card's cable connections.

11.

Replace the computer cover, reconnect the computer and devices to electrical outlets, and then turn them on.

12.

To complete the installation, see

Configuring Your Computer After Removing or Installing a PCI/PCI Express Card

Replacing the Card Retention Bracket

NOTE:

If you are installing a PCI Express card into the x16 connector, ensure that the securing slot is aligned with the securing tab.

PCI Express x16 card

securing tab

PCI Express x1 card

PCI Express x1 card slot

PCI Express x16 card slot

alignment bar

fully-seated card

not fully-seated card

alignment guide

bracket within slot

bracket caught outside of slot

NOTICE:

Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer cover from closing properly or

cause damage to the equipment.

Summary of Contents for Studio 540





































Search results

Summary of Contents for Studio 540

Reviews:

Related manuals for Studio 540

Brands by name

Popular brands

Dell Studio 540, Service Manual

Search results

Summary of Contents for Studio 540

Reviews:

Related manuals for Studio 540

Brands by name

Popular brands