Dell Studio 540 Service Manual Download Page 4

Page: 4 / 36

Great user manuals database on

UserManuals.info

Back to Contents Page

Replacing a PCI/PCI Express Card

Dell Studio™ 540 Service Manual

Removing a PCI/PCI Express Card

Installing a PCI/PCI Express Card

Replacing the Card Retention Bracket

Configuring Your Computer After Removing or Installing a PCI/PCI Express Card

Removing a PCI/PCI Express Card

Uninstall the card's driver and software from the operating system. For more information, see the

Setup Guide

Follow the procedures in

Before You Begin

Remove the computer cover (see

Replacing the Computer Cover

Remove the screw holding the card retention bracket.

Lift the card retention bracket and set it aside in a secure place.

If necessary, disconnect any cables connected to the card.

For a PCI card, grasp the card by its top corners, and ease it out of its connector.

For a PCI Express card, pull the securing tab, grasp the card by its top corners, and then ease it out of its connector.

If you are replacing an existing card, go to

step 6

Installing a PCI/PCI Express Card

Install a filler bracket in the empty card-slot opening.

Replace the card retention bracket. See

Replacing the Card Retention Bracket

10.

Replace the computer cover, reconnect the computer and devices to electrical outlets, and then turn them on.

11.

To complete the removal procedure, see

Configuring Your Computer After Removing or Installing a PCI/PCI Express Card

Installing a PCI/PCI Express Card

Follow the procedures in

Before You Begin

Remove the computer cover. See

Replacing the Computer Cover

CAUTION:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

1 card retention bracket 2 filler bracket

NOTICE:

Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer. The brackets also keep dust

and dirt out of your computer.

Summary of Contents for Studio 540





































Search results

Summary of Contents for Studio 540

Reviews:

Related manuals for Studio 540

Brands by name

Popular brands

Dell Studio 540, Service Manual

Search results

Summary of Contents for Studio 540

Reviews:

Related manuals for Studio 540

Brands by name

Popular brands