manualshive.com logo in svg

Dell Studio 540, Service Manual, Page: 21 / 36

Share
Download
Dell Studio 540 Service Manual Download Page 21

Great user manuals database on 

UserManuals.info

Back to Contents Page

  

 

 Replacing the Front I/O Panel  

Dell Studio™ 540 Service Manual 

 

 

 

 

 

 

1.

Follow the procedures in 

Before You Begin

.  

 

 

  

2.

Remove the computer cover (see 

Replacing the Computer Cover

).  

 

 

  

3.

Remove the front panel (see 

Replacing the Front Panel

).  

 

 

  

4.

Remove any expansion cards (see 

Replacing a PCI/PCI Express Card

).  

 

 

 

5.

Disconnect the cables connected to the I/O panel from the system board.  
 

 

  

6.

Remove the screw that secures the I/O panel to the chassis.  
 

 

  

7.

Carefully remove the existing I/O panel from the computer.  
 

  

 

 

8.

To replace a new I/O panel, align and slide the I/O panel clamp into the I/O panel clamp slot.  
 

 

  

9.

Replace the screw that secures the I/O panel to the chassis.  
 

 

  

10.

Reconnect the cables to the system board.  
 

 

  

11.

Replace any expansion cards (see 

Replacing a PCI/PCI Express Card

).  

 

 

  

12.

Replace the front panel (see 

Replacing the Front Panel

).  

 

 

  

13.

Replace the computer cover (see 

Replacing the Computer Cover

).  

 

 

  

14.

Connect your computer and devices to an electrical outlet, and turn them on.  
 

Back to Contents Page

 

 

 

 

CAUTION: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

 

NOTICE: 

Carefully note the routing of each cable before you disconnect it, so that you are sure to re-route cables correctly. An incorrectly routed or a 

disconnected cable could lead to computer problems.

1 

I/O panel clamp slot 

2 

I/O panel clamp 

3 

screw 

4 

I/O panel  

5 

cables 

 

 

 

 

Summary of Contents for Studio 540





































Reviews:

No comments