background image

Great user manuals database on 

UserManuals.info

Back to Contents Page

  

 

 Battery  

  

Removing the Battery 

 

  

Replacing the Battery 

 

 

 

 

 

 

 

 

 

Removing the Battery  

 

 

1.

Follow the procedures in 

Before You Begin

 

 

 

  

2.

Turn the computer over.  
 

 

  

3.

Slide the battery release latch until it clicks into place.  
 

 

  

4.

Slide the battery out of the battery bay.

  

 
 

 

Replacing the Battery  

To replace the battery, slide the battery into the battery bay until it clicks into place. 

Back to Contents Page

 

 

 

 

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 

 

CAUTION: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal 

surface (such as a connector on your computer).

 

CAUTION: 

To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the 

computer.

 

CAUTION: 

To avoid damage to the computer, use only the battery designed for this particular Dell™ computer. Do not use batteries designed for 

other Dell computers.

battery 

battery release latch 

Summary of Contents for Studio 1457
















































Reviews: