Dell Studio 1457 Service Manual Download

Page: 6 / 47

Great user manuals database on

UserManuals.info

Turn off your computer (see

Turning Off Your Computer

) and all attached devices.

Disconnect all telephone or network cables from the computer.

Press and eject any installed cards from the ExpressCard slot or the 8-in--1 Media Card Reader.

Disconnect your computer and all attached devices from their electrical outlets.

Disconnect all attached devices from your computer.

Remove the battery (see

Removing the Battery

Turn the computer top-side up, open the display, and press the power button to ground the system board.

Back to Contents Page

CAUTION:

To disconnect a network cable, first unplug the cable from your computer and then unplug the cable from the network device.

CAUTION:

To help prevent damage to the system board, remove the main battery (see

Removing the Battery

) before working inside the

computer.

Summary of Contents for Studio 1457
















































Search results

Summary of Contents for Studio 1457

Reviews:

Related manuals for Studio 1457

Brands by name

Popular brands

Dell Studio 1457, Service Manual

Search results

Summary of Contents for Studio 1457

Reviews:

Related manuals for Studio 1457

Brands by name

Popular brands