16
|
Regulatory Model/Type
Product Name
APL27-0B1 SonicPoint
ACi
Mounting the appliance
WARNING:
• Mount in a location away from direct sunlight and
sources of heat. A maximum ambient temperature
of 104º F (40º C) is recommended.
• Route cables away from power lines, fluorescent
lighting fixtures, and sources of noise such as
radios, transmitters, and broadband amplifiers
• The included power cord(s) are approved for use
only in specific countries or regions. Before using a
power cord, verify that it is rated and approved for
use in your location.
• Ensure that no water or excessive moisture can
enter the unit.
• Allow unrestricted airflow around the unit and
through the vents on the side of the unit. A
minimum of 1 inch (25.44mm) clearance is
recommended.
• Consideration must be given to the connection of
the equipment to the supply circuit and that the
effect of overloading the circuits has minimal
impact on overcurrent protection and supply
wiring. Appropriate consideration of equipment
nameplate ratings must be used when addressing
this concern.
• This device is not intended for use in the direct
field of view at visual display workplaces. To avoid
incommoding reflections at visual display
workplaces, this device must not be placed in the
direct field of view.
Cable connections
WARNING:
All Ethernet and RS232 (Console) cables are designed for
intra-building connection to other equipment. Do not
connect these ports directly to communication wiring or
other wiring that exits the building where the appliance is
located.
