manualshive.com logo in svg

Dell SmartPC 150D, Owner'S Manual

Share
Download
Dell SmartPC 150D Owner'S Manual Download Page 52

52

A d d i n g   Pa r t s

www

.dell.com | support.dell.com

 

CAUTION: 

Before you begin any of the procedures in this section, 

follow the safety instructions on page 7.

 

CAUTION: 

To guard against electrical shock, always unplug your 

computer from the electrical outlet before opening the cover.

1

Shut down the computer (see page 18).

2

Turn off any attached devices and disconnect them from their 
electrical outlets.

 

NOTICE: 

To disconnect a network cable, first unplug the cable from your 

computer and then unplug it from the network wall jack.

3

Disconnect the computer power cable from the wall outlet, and then 
press the power button to ground the system board.

4

Face the front of the computer. Place your left hand on the left side of 
the computer. Push back the release latch at the top-back edge of the 
computer to release the computer cover into your left hand. 

release latch

computer cover

Summary of Contents for SmartPC 150D



















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands