4. Disassembly and Assembly Procedures
Remove the circuit boards from the
disconnect all
of the cables.
bracket
chassis module carefully, and then
S15
Turn over the bracket chassis module. Use a Philips-
head screwdriver to remove
screws for
unlocking power board and interface board, and
then release the EDP cable from the hook of the
bracket.
6pcs
(No.1 screw size=M4x8, Torque=6
±0.5
kgfxcm;
No.2~7 screw size=M3x7.5, Torque=6
±0.5
kgfxcm)
S14
Tear off the adhesive tape, and then disconnect the
EDP cable from the connector of the panel module,
then put the bracket chassis on a protective cushion.
S13
3
4
2
1
5
6
