Dell S2317HWI User Manual Download Page 36

Page: 36 / 71

| Operating

the

Monitor

NOTE:

This monitor has a built-in feature to automatically calibrate the brightness

to compensate for LED aging.

DDC/CI

(Display Data Channel/Command Interface) allows your

monitor parameters (brightness, color balance, and etc.) to be
adjustable via the software on your computer.

You can disable this feature by selecting

Disable

Enable this feature for best user experience and optimum
performance of your monitor.

NOTE:

The function is only available when using an HDMI connection.

LCD

Conditioning

Helps reduce minor cases of image retention. Depending on the
degree of image retention, the program may take some time to run.
You can enable this feature by selecting

Enable

Reset Others

Reset all settings under the

Others

menu to the factory preset values.

Factory Reset

Reset all settings to the factory preset values.

Summary of Contents for S2317HWI








































































Search results

Summary of Contents for S2317HWI

Reviews:

Related manuals for S2317HWI

Brands by name

Popular brands

Dell S2317HWI, User Manual

Search results

Summary of Contents for S2317HWI

Reviews:

Related manuals for S2317HWI

Brands by name

Popular brands