Dell S2317HWI User Manual Download Page 25

Page: 25 / 71

Operating

the

Monitor |

Using the Front-Panel Controls

Use the control buttons on the front of the monitor to adjust the characteristics of the
image being displayed. As you use these buttons to adjust the controls, an OSD shows
the numeric values of the characteristics as they change.

The following table describes the front-panel buttons:

Front-Panel Button

Description

Shortcut key/

Volume

Use the buttons to adjust the volume. Minimum is 0 (-).
Maximum is 100 (+).

Shortcut key/

Input Source

Use this button to choose from a list of video signals that may
be connected to your monitor.

Use the

button to launch the On-Screen Display

(OSD) and select the OSD Menu. See

Accessing the Menu

System

Exit

Use this button to go back to the main menu or exit the OSD
main menu.

Power

(with power light

indicator)

Use the

Power

button to turn the monitor

and

Off

Solid white light indicates the monitor is turned on. Blinking
white light indicates it is in power-save mode.

Summary of Contents for S2317HWI








































































Search results

Summary of Contents for S2317HWI

Reviews:

Related manuals for S2317HWI

Brands by name

Popular brands

Dell S2317HWI, User Manual

Search results

Summary of Contents for S2317HWI

Reviews:

Related manuals for S2317HWI

Brands by name

Popular brands