16
| About
Your
Monitor
Power Management Modes
If you have VESA's DPM™ compliance display card or software installed in your PC, the
monitor can automatically reduce its power consumption when not in use. The following
table shows the power consumption and signaling of this automatic power saving
feature.
VESA Modes
Horizontal
Sync
Vertical
Sync
Video
Power
Indicator
Power
Consumption
Normal
operation
Active
Active
Active
White
55 W (maximum)*
24 W (typical)
Wireless
standby mode
Inactive
Inactive
Blanked
White (breathing)
Less than 3 W
(network standby)
Switch off
-
-
-
Off
Less than 0.3 W
* Maximum power consumption with max luminance, and USB active.
** Energy consumption (On Mode) is tested at 230 Volts / 50 Hz. Measurements are
indicative for monitor head only without charging base turned on.
This document is informational only and reflects laboratory performance. Your product
may perform differently, depending on the software, components and peripherals you
ordered and shall have no obligation to update such information. Accordingly, the
customer should not rely upon this information in making decisions about electrical
tolerances or otherwise. No warranty as to accuracy or completeness is expressed or
implied.
The OSD functions only in the normal operation mode. When any button is pressed
under HDMI mode (with
Auto Select
function turned Off), the following message will be
displayed:
Activate the computer and the monitor to gain access to the OSD.
Non-operating
12,192 m (40,000 ft) (maximum)
Thermal dissipation
•
187.66 BTU/hour (maximum)
•
81.89 BTU/hour (typical)
