Dell Precision Workstation 390, Quick Reference Manual

Page: 30 / 368

30
Quick Reference Guide
To access the User’s Guide from your hard drive:
Click the Start button and click Help and Support .
To access your User’s Guide from the Dell Support website:
1
Go to support.dell.com .
2
Follow the prompts on the website that ask you for information specific to your computer.
3
At the Dell Support website home page, click Reference , click User’s Guides , click Systems ,
and then select your computer.
Removing the Computer Cover
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located
in the Product Information Guide .
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before
removing the cover.
NOTICE:
Before touching anything inside your computer, ground yourself by touching an unpainted metal surface,
such as the metal at the back of the computer. While you work, periodically touch an unpainted metal surface to
dissipate any static electricity that could harm internal components.
NOTICE:
To avoid losing data, save and close any open files and exit any open programs before you turn off your
computer.
1
Shut down the operating system:
a
Save and close any open files, exit any open programs, click the Start button, and then click Turn
Off Computer .
b
In the Turn off computer window, click Turn off .
The computer turns off after the operating system shutdown process finishes.
2
Ensure that the computer and any attached devices are turned off. If your computer and attached
devices did not automatically turn off when you shut down your operating system, turn them off now.
3
If you have installed a security cable, remove it from the security cable slot.
NOTICE:
Ensure that you are working on a level, protected surface to avoid scratching either the computer or the
surface on which it is resting.
4
Lay your computer on a flat surface with the computer cover facing up.
5
Pull back the cover latch release.