Installing the Power Switch
1.
Slide the power-switch cable in through the front of the computer.
2.
Secure the power-switch cable to the chassis.
3.
Thread the power-switch cable into the chassis clips.
4.
Connect the power-switch cable to the system board.
5.
Install the:
a) optical drive
b) front panel
c) cover
6.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Input/Output (I/O) Panel
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a) cover
b) front panel
3.
Disconnect the I/O panel and FlyWire cable from the system board.
31