Figure 8.
Installing the Memory
1.
Insert the memory module into the socket on the system board.
NOTE: Memory module must be installed beginning with the white tabbed sockets first.
2.
Press down on the memory module until the retention-clips spring back to secure them in place.
3.
Install the cover.
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Coin-Cell Battery
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a) cover
b) expansion card(s)
3.
Press the release latch away from the battery to allow the battery to pop-up from the socket and lift the coin-cell
battery out of the computer.
Figure 9.
Installing the Coin-Cell Battery
1.
Place the coin-cell battery into its slot on the system board.
2.
Press the coin-cell battery downward until the release latch springs back into place and secures it.
3.
Install the:
a) expansion card(s)
b) cover
4.
Follow the procedures in
After Working Inside Your Computer
.
13